 |
|
|
|
Sheet Metal Roll Forming Machines
Certification
sheet metal forming equipment
Smart Cold Roll Forming Machines / Sheet Metal Forming Equipment With 3kw Motor
Product Details:
850 Corrugated Sheet Metal Roof Roll Forming Machine / 850 Corrugated Steet Roof Tile Roll Forming Mmachine
| NO. | Parameters |
Colored glazed tile making machine/Xinghe machinery galvanized steel sheet product line |
|
| 1 | Raw material | suitable material |
colored material coil,galvanized coil, aluminum coil |
| feeding width | 1000mm(can design as your need) | ||
| thickness | 0.27-0.8mm | ||
| 2 | Effective width | 850mm | |
| 3 | Rollers | material | 45#steel plate with chrome |
| rows | 9 rows | ||
| 4 | shafts | material | 45#steel |
| diameter | 70mm | ||
| 5 | Cutting blade | hydrualic cutting ,Cr12 with quenching treatment | |
| 6 | Capacity | 6-12m/min | |
| 7 | Weight | 3.0T | |
| 8 | Control system | PLC control system with transducer inside | |
| 9 | Dimension | 5600*1300*1000mm | |
| 10 | Machine body | 300mm H shape steel | |
| 11 | Middle plate | 14mm | |
| 12 | Power | 3KW+3KW | |
| 13 | Process precission | within 1 mm | |
4KW Sheet Metal Forming Equipment With With High Accuracy Measurement Device
Product Details:
(1). Brief Introduction
The Roof Panels made by our Roll Forming Machine have beautiful appearance and bright color.
They are widely used in gardens, factories, resorts, hotels, exhibition halls, vacationlands,
ancient architectures and modern villas.
(2). Working Flow of Roll Forming Machine
Decoiling the sheet-Sheet guiding-Roll forming-Measure length-Cutting the panel-Panels to the supporter
(3).Technical Detail
A. General
| Suitable Material | Q235 or equivalent |
| Material Thickness | 0.3-0.7 mm |
| Material Width | 914, 1000, 1200, 1220 or 1250, as per the drawing |
| Dimension | About 6.5*1.3*1.1m(L*W*H) , as per the drawing |
| Working Space | About 16.5*2.8m(L*W) , as per the drawing |
|
Length of the Sheet |
You can set the length according to your need. It is controlled by PLC which can ensure the accuracy of ±1mm. |
| Cutting |
Automatically stop and cutting when it comes to the set length. |
B. Components Details
| Roller Material | A3 steel. Hard chrome plating, 0.05mm. |
| Main Frame | 350# steel. More stable and no shaking. |
| Middle Plate |
16mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 11-16, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. |
|
Treating process: tempering- finish turning, high rigidity, hard to deform. |
|
|
Cutting Blade Material |
Cr12, hardness HRC60-62. |
| Treating process: heat treatment- plane abrasion- wire electrode cutting. |
C. Electric Components
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate. |
| PLC | Delta |
|
well-adapted to various conditions, such as moisture, electromagnetic disturbance. |
|
| Frequency Converter |
Delta. It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
|
Length Measurement Device |
Omron, made in Japan. |
| It features with high accuracy and stability. |
Galvanized Sheet Metal Forming Equipment , Double Layer Roll Forming Machine
Product Details:
Automatic 750 Zinc Metal Steel Sheet Wave Roof Panel Rolling Machine Price
Please kindly check the package and our service :
1. Insalations and training
a. If buyers visit our factory and check the machine, we will teach you how to install and use the machine,and also train your workers/technician face to face.
b. Without visiting, we will send you user manual and video to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
2. After Sevice
a. One year guarantee for whole machine.
b. 24 hours technical support by email or calling
c. If there is any problem found of the machine, we will repair it for free in one year.
| o | Item | Parameter | Note | |
| 1 |
Suitable Material
|
Type | steel roof cold roll forming machine |
roll forming machine |
| Coil width | 1000mm | |||
| Thickness | 0.3-0.7mm | |||
| Yield Strength | 235MPA | |||
| 2 |
Product Specs |
Cover width | Customized Profile | |
| Length | Any length | |||
|
3
|
Power Specs |
voltage | 380V/3PH/50HZ | Up to Practical Profile |
| Main Motor | 4.0KW | |||
| Hydraulic | 4.0KW | |||
| 4 |
Machine Specs |
Transmission | Chain and Sprocket | Gearbox and Cardan Acceptable |
| Structure | Column Block Or Wall Plate | |||
| Shafter | No.45 steel tempered | |||
| Rollers | No.45 steel chrome coated | Cr12 or other acceptable | ||
| Cutting Blade | Cr12 quenched | |||
| Press Mould | Cr12 quenched | |||
| Punch Mould | Cr12 quenched | |||
| 5 |
Working Capacity |
Forming Speed | 15-20m/min for standard solution | Higher Speed Solution Available |
| Working Speed | Up to Length-set Cutting | |||
| 6 |
Hydraulic Cantilever Decoiler (Optional) |
Type | Hydraulic | |
| Max. Capacity | 5 T/10T/15T | |||
| Suitable coil OD | 1200mm | |||
| Suitable coil ID | 508/610mm | |||
| Max Coil width | 1250mm | |||
| 7 | Forming Stand | 8-48 | Up to Practical Profile | |
| 8 | Forming Shaft Diameter | 55-120mm | Up to Practical Profile | |
| 9 | Type of Cutting | Length-set cutting after roll formed,CR12 mould steel | Pre-cutting acceptable | |
| 10 | Control System | Mitsubishi PLC and Inverter | ||
| 11 | Output Supporter | 2 Pcs Simple Supporter | Auto Stacker Optional |
|
Automatic Tile Sheet Metal Forming Equipment With Coil Sheet Guiding Device
Product Details:
Automatic 850 Metal Roofing Corrugated Tile Roll Forming Machine/ Colored Steel Sheet Roll Making Line
Color Steel Roofing Profile Double Layer Roll Forming Machine
The Color Steel Roofing Profile Roll Forming Machine can produce various of steel roof and wall panel, it is a new building materials ,the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period , beauty, light weight but high strength.
Machine parameter
| No. | 850 Corrugated sheet roll forming machine | |
| 1 | Suitable to process | Color steel plate |
| 2 | Width of the plate | 1000mm |
| 3 | Rollers | 9 rows |
| 4 | Dimensions | 4.9*1.3*1.2m |
| 5 | Power | 3+3kw |
| 6 | Thickness of the plate | 0.3-0.8mm |
| 7 | Productivity | 8-12m/min |
| 8 | Diameter of the roller | Φ80mm |
| 9 | Weight | About 4.0 T |
| 10 | Voltage | 380V 50Hz 3phases |
| 11 | Rolling material | Carbon Steel 45# |
| 12 | Material of the cutting plate | Cr12 |
| 13 | Processing precision | Within 1.00mm |
| 14 | Control system | PLC control |
Automatic Wall Panel Roll Forming Machine , Sheet Metal Forming Equipment
Product Details:
850 Corrugated iron roofing sheet making roll forming machine
| NO. | Parameters |
Colored glazed tile making machine/Xinghe machinery galvanized steel sheet product line |
|
| 1 | Raw material | suitable material |
colored material coil,galvanized coil, aluminum coil |
| feeding width | 1000mm(can design as your need) | ||
| thickness | 0.27-0.8mm | ||
| 2 | Effective width | 850mm | |
| 3 | Rollers | material | 45#steel plate with chrome |
| rows | 9 rows | ||
| 4 | shafts | material | 45#steel |
| diameter | 70mm | ||
| 5 | Cutting blade | hydrualic cutting ,Cr12 with quenching treatment | |
| 6 | Capacity | 6-12m/min | |
| 7 | Weight | 3.0T | |
| 8 | Control system | PLC control system with transducer inside | |
| 9 | Dimension | 5600*1300*1000mm | |
| 10 | Machine body | 300mm H shape steel | |
| 11 | Middle plate | 14mm | |
| 12 | Power | 3KW+3KW | |
| 13 | Process precission | within 1 mm | |
High Speed Sheet Metal Forming Equipment / Tiles Making Machine With 19 Rollers
Product Details:
Roof Sheet Roll Forming Machine,JCH-820 Folding Tamping Plant,Coloured Steel Tile Forming Machine
Process
* The process of roll forming is one of the simpler manufacturing processes.
1. It typically begins with a large coil of sheet metal, between 1 in. and 20in. in width, and 0.004 in. and 0.125 in. thick, supported on an uncoiler.
2. The strip is fed through an entry guide to properly align the material as it passes through the rolls of the mill, each set of rolls forming a bend until the material reaches its desired shape.
3. Roll sets are typically mounted one over the other on a pair of horizontal parallel shafts supported by a stand(s).
4. Side rolls and cluster rolls may also be used to provide greater precision and flexibility and to limit stresses on the material.
5. The shaped strips can be cut to length ahead of a roll forming mill, between mills, or at the end of the roll forming line.
| 1.Suitable material | Color steel sheet , galvanized steel sheet,aluminum sheet |
| 2.Installation Dimension (L*W*H): | 6.5m*1.5m*1.4m |
| 3.Main motor power | 3KW with Cycloidal reducer |
| 4.Hydraulic station power | 3KW |
| 5. Hydraulic oil pump | CB-E 310 |
| 6.Thickness of material | 0.2mm~0.8mm |
| 7.Diameter of principal axis | Φ70-90mm |
| 8.Material expand width | 1000,1200,1250mm |
| 9.Electric tension | 380V 3phase 50HZ or as the customer's requirements |
| 10.Material of roller | High grade 45# forged steel plated with hard chrome plating |
| 11.Controlling system | PLC |
| 12.Processing speed | 3-6m/min |
| 13.Processing precision within | 1.00mm (depend on design) |
| 14.Material of cutting blade | Cr12 mould steel with quenched treatment |
| 15.Kind of drive | 0.6 inch chain link bearing model 6210 |
| 16.Roller station | 19 Rollers |
| 17.Roller material | high grade 45#steel; Cr12 quenching |
| 18. Leak frame load-bearing | 4.6T |